DUALSONIC MAXIMUM

For all skin types

Advantages

• The only multifunctional beauty device with infinite shot of HIFU with 7 premium skincare technologies – HIFU / RF /EP / Microcurrent / IR LED / RED LED / YELLOW LED
• Patented dual-layer HIFU technology
  • Simultaneous care of two different skin layers at the same time which delivers focused ultrasound energy deep into the skin to help improve skin elasticity & face lifting.
• RF
  • The thermal energy of high-frequency current generates heat deep inside the skin tissue and stimulates the dermal layer of the skin with warm heat to help improve skin inner density and elasticity.
• Triple energy technology
  • Application depth varies depending on frequency, is maximized with 1/2/3Mhz triple energy
• Detailed intensity control
  • Energy level control from 1 to 3
• Simple use
  • Easy to use one-touch operation
• Smart OLED
  • Visible at glance battery status and energy level

Other features of device

• MICROCURRENT

Vibrations of about 20 times (20Hz) per second help to improve skin elasticity by exercising the skin through fine electrical stimulation.

• ELECTROPORATION

Vibrations of about 20,000 times per second (40KHz) temporarily creates micro holes in the skin surface to deliver nutrients deep into the skin to help absorb cosmetics.

• IR LED

The skin is irradiated to a depth of up to 4mm IR LED prevents skin pigmentation helps to promote skin regeneration

• RED LED

Improves overall metabolic activity of the skin activates cell regeneration and rehabilitation helps to improve skin elasticity

• YELLOW LED

Makes skin clear and transparent providing brightening effect, wrinkle reduction, freckles and blemishes improvement helps to improve skin elasticity and skin lifting.

5 Major Face skincare modes that provide fully delicate care to your skin and improve the elasticity and outlook from inside out.

Face-UP mode

HIFU 2.5mm + 3.0mm Dual mode

RED LED: Elasticity care/ wrinkle improvements

Dual mode HIFU + Elasticity improvement + Saggy skin angle improvement (nasolabial folds)

Eye-UP mode

HIFU 1.5mm + 2.0mm Dual mode

YELLOW LED: Elasticity care/ wrinkle improvements

Dual mode HIFU + Detailed around eye elasticity improvement + Anti-pigmentation + Skin around the eyes improvement

Tight-UP mode

Radiofrequency

RED LED: Elasticity care/ wrinkle improvements

Skin elasticity improvement + Face contour management + Wrinkle improvement + Skin density improvement (cheeks)

The only one in the industry Triple RF!

• Point 1 The unique triple high-frequency application
  • The 1Mhz, 2Mhz, 3Mhz, triple high frequencies are sequentially investigated. Each frequency delivers energy evenly into the skin for more effective care of different skin layers.

3Mhz Brightening

2Mhz Moisturizing

1Mhz Strengthening skin barrier

• Point 2 Leading in the industry 3MHz frequency
  • The higher the frequency, the shallower the skin layer, and the more concentrated the energy applied.
• Point 3 Up to about 3 million vibrations per second
  • It generates heat of about 40 degrees in the skin to increase blood flow and activate collagen.

Daily-UP mode

Microcurrent

IRLED: Restoration of relaxed skin by stimulating collagen and elastin

RED LED + YELLOW LED (sequential) : elasticity care/ wrinkle improvement + blemishes improvement / soothing effect

Skin texture improvement + Pore improvement + Wrinkle improvement + Anti-pigmentation

Cos-UP mode

Electroporation

RED LED + YELLOW LED (simultaneous): elasticity care/ wrinkle improvement + blemishes improvement / soothing effect

High skin penetration + Skin tone improvement + Wrinkle improvement + Skin moisturization improvement

Benefits

36 kinds of human application test results on skin improvement in all aspects*:

• The skin that changes immediately after one use!
• Sagging angle (elasticity) improvement of 4 areas (eye area, corners of the mouth, cheeks, and chin)
• 5 types of skin elasticity improvement (cheeks, around lips, deep elasticity, elastic restoring force)
• Skin elasticity improvement (cheeks, around the mouth area
• 3 types of skin elasticity improvement (skin deep elasticity, skin elasticity, elastic restoring force)
• Cheeks/around lips area 24 hrs elasticity maintenance result
• Elastic restoring force improvement
• Skin density improvement (around eyes, cheeks area)
• 4 types of pore improvement tests (pore area (tightening), pore numbers, pore density, pore depth)
• Skin texture improvement (roughness, unevenness, smoothness)
• Skin radiance improvement (glow, radiance)
• 4 types of skin moisturization improvement
  Appearance improvement (cheeks area)
• Skin moisturizing by layers of the skin (cheeks area)
• Cheeks area 24 hrs moisture retention (capture, retention) result improvement
• Skin transparency (brightening) improvement (cheeks, full face)
• Cosmetic penetration improvement in comparison with simple application (penetration rate, speed, depth)
• Efficacy Test: Korean Skin Institute 2022, 23 subjects, DUALSONIC Maximum + Blooming Moisture Gel simultanous application / instant results, environmental and skin conditions may have individual differences.
• Absorption Test: Korean Skin Institute 2022, 23 subjects, DUALSONIC Maximum + Nutrition cream(Lab No. CR1130-A2) simulta-nous application, environmental and skin conditions may have individual differences.

Direction for use:

• STEP 1 – Apply enough Blooming gel to the treatment area. (Because the gel may dry out it is advised to apply it to the treatment area just before the procedure.) * When using COS-UP mode, apply your own ampoule or cream.*
• STEP 2 – Press the power button on the right side of the screen and hold for more than 3 seconds to turn the power on.
• STEP 3 – When the power is turned on, the STANDBY status is displayed when energy intensity and mode can be adjusted.
• STEP 4 – Using mode change button, select the desired mode among F(Face up) mode, E(Eye-up) mode, T (Tight-up) mode, D(Daily-up) mode, C (Cos-up) mode.
• STEP 5 – After selecting a mode, press the energy intensity button (downward) to select the desired intensity (steps 1-3)
• STEP 6 – Shortly press READY/STANDBY button to activate the output.
• STEP 7 – After treatment, press and hold the power button on the right side of the screen for more than 3 seconds to turn off the power.

If any queries, please refer to the instructions provided  by the user manual.

Cautions:

Before the Procedure

1. Do not use any products that may irritate the skin for at least 3 days before the procedure.
2. Use a cleanser to gently wash your face before the procedure.
3. Make sure that your face is completely dry before starting the procedure.

During the Procedure

1. Make sure to use the ultrasound hydration gel for the procedure…
2. Do not use the device on any filler injection sites or autologous fat grafting sites.
3. Do not use this product around the eyes or the lips.

After the Procedure

1. The application sites may redden after the procedure (the redness will disappear within a few hours).
2. Do not go a sauna or jimjilbang (Korean-style sauna) after the procedure.
3. Do not exfoliate or irritate your skin for at least a week after the procedure.
4. Do not scratch or touch the application sites even if there itchiness.

DANGER

Strictly prohibited

Device usage must be complied with any of the following situations:

1. Child / pregnant woman must not use the device
2. The device must not be used on open wound areas / hypertrophic scars
3. The device must not be used on serious follicular acne / sensitive skin
4. The device must not be used on on areas with metal stent
5. The device must not be used on on areas with bio-absorbent implants